Swisslinux.org

jbgruring · 19 Jan 2015 10:08:04

Bonjour,
Lorsque je branche une carte SD (qui contient des photos) sur le connecteur qui se trouve à gauche, la carte n'est pas reconnue par la machine (Why 253EU). J'ai testé cette fonction sur 2 machines différentes et la réaction est identique.
Je n'ai pas trouvé d'infos dans le Forum.
Avec mes meilleures salutations.
Jbgruring

jbgruring · 19 Jan 2015 10:19:16

Petite information supplémentaire.
Lorsque je branche un lecteur de carte sur une prise USB, tout fonctionne parfaitement. Le problème se situe donc dans le lecteur de carte SD du PC.
Avec mes meilleures salutations.
Jbgruring

sebseb01 · 19 Jan 2015 10:29:07

Bonjour,

Ouvre un terminal, (comment faire ?). Puis ...

Peut-tu coller ici le résultat de la commande suivante ?

Code:

lsusb

(afin de vérifier si le lecteur de carte est vu par le système)
"lsusb", retourne la liste des appareils USB détecte (et la grande majorité des lecteurs SD même interne sont branché en USB)

Et éventuellement le résultat de la commande suivante après avoir insérer la carte dans le connecteur à gauche de la machine

Code:

dmesg

"dmesg", retourne les message du noyaux (le cœur de tout ça)

Dernière modification par sebseb01 (19 Jan 2015 10:33:36)

jbgruring · 19 Jan 2015 13:25:43

Bonjour sebseb01 et merci pour les réponses. Voici les éléments affichés dans le terminal.

Panne carte SD sur Why 253 SSD

Commande lsusb

Code:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub 
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub 
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub 
Bus 003 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver

Commande dmesg

Code:

[    1.666846] pnp 00:05: [io  0x0063] 
[    1.666847] pnp 00:05: [io  0x0065] 
[    1.666848] pnp 00:05: [io  0x0067] 
[    1.666849] pnp 00:05: [io  0x0068] 
[    1.666850] pnp 00:05: [io  0x006c] 
[    1.666851] pnp 00:05: [io  0x0070] 
[    1.666852] pnp 00:05: [io  0x0080] 
[    1.666853] pnp 00:05: [io  0x0092] 
[    1.666855] pnp 00:05: [io  0x00b2-0x00b3] 
[    1.666856] pnp 00:05: [io  0x0680-0x069f] 
[    1.666857] pnp 00:05: [io  0x1000-0x100f] 
[    1.666858] pnp 00:05: [io  0xffff] 
[    1.666859] pnp 00:05: [io  0xffff] 
[    1.666861] pnp 00:05: [io  0x0400-0x0453] 
[    1.666862] pnp 00:05: [io  0x0458-0x047f] 
[    1.666863] pnp 00:05: [io  0x0500-0x057f] 
[    1.666864] pnp 00:05: [io  0x164e-0x164f] 
[    1.666865] pnp 00:05: [io  0x3322-0x3323] 
[    1.666897] system 00:05: [io  0x0680-0x069f] has been reserved 
[    1.666899] system 00:05: [io  0x1000-0x100f] has been reserved 
[    1.666901] system 00:05: [io  0xffff] has been reserved 
[    1.666902] system 00:05: [io  0xffff] has been reserved 
[    1.666904] system 00:05: [io  0x0400-0x0453] has been reserved 
[    1.666906] system 00:05: [io  0x0458-0x047f] has been reserved 
[    1.666907] system 00:05: [io  0x0500-0x057f] has been reserved 
[    1.666909] system 00:05: [io  0x164e-0x164f] has been reserved 
[    1.666911] system 00:05: [io  0x3322-0x3323] has been reserved 
[    1.666913] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) 
[    1.666919] pnp 00:06: [io  0x0070-0x0077] 
[    1.666927] pnp 00:06: [irq 8] 
[    1.666943] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) 
[    1.666962] pnp 00:07: [io  0x0454-0x0457] 
[    1.666989] system 00:07: [io  0x0454-0x0457] has been reserved 
[    1.666991] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) 
[    1.666997] pnp 00:08: [io  0x0060] 
[    1.666999] pnp 00:08: [io  0x0064] 
[    1.667002] pnp 00:08: [irq 1] 
[    1.667035] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) 
[    1.667086] pnp 00:09: [irq 12] 
[    1.667103] pnp 00:09: Plug and Play ACPI device, IDs SYN1212 PNP0f13 (active) 
[    1.667120] pnp 00:0a: [io  0x0010-0x001f] 
[    1.667121] pnp 00:0a: [io  0x0022-0x003f] 
[    1.667123] pnp 00:0a: [io  0x0044-0x005f] 
[    1.667124] pnp 00:0a: [io  0x0072-0x007f] 
[    1.667125] pnp 00:0a: [io  0x0080] 
[    1.667126] pnp 00:0a: [io  0x0084-0x0086] 
[    1.667127] pnp 00:0a: [io  0x0088] 
[    1.667129] pnp 00:0a: [io  0x008c-0x008e] 
[    1.667131] pnp 00:0a: [io  0x0090-0x009f] 
[    1.667132] pnp 00:0a: [io  0x00a2-0x00bf] 
[    1.667133] pnp 00:0a: [io  0x00e0-0x00ef] 
[    1.667135] pnp 00:0a: [io  0x04d0-0x04d1] 
[    1.667163] system 00:0a: [io  0x04d0-0x04d1] has been reserved 
[    1.667165] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) 
[    1.667171] pnp 00:0b: [io  0x00f0-0x00ff] 
[    1.667175] pnp 00:0b: [irq 13] 
[    1.667193] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active) 
[    1.667343] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff] 
[    1.667345] pnp 00:0c: [mem 0xfed10000-0xfed17fff] 
[    1.667346] pnp 00:0c: [mem 0xfed18000-0xfed18fff] 
[    1.667347] pnp 00:0c: [mem 0xfed19000-0xfed19fff] 
[    1.667349] pnp 00:0c: [mem 0xf8000000-0xfbffffff] 
[    1.667350] pnp 00:0c: [mem 0xfed20000-0xfed3ffff] 
[    1.667351] pnp 00:0c: [mem 0xfed90000-0xfed93fff] 
[    1.667353] pnp 00:0c: [mem 0xfed45000-0xfed8ffff] 
[    1.667354] pnp 00:0c: [mem 0xff000000-0xffffffff] 
[    1.667355] pnp 00:0c: [mem 0xfee00000-0xfeefffff] 
[    1.667357] pnp 00:0c: [mem 0xdfa00000-0xdfa00fff] 
[    1.667395] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved 
[    1.667397] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved 
[    1.667399] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved 
[    1.667401] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved 
[    1.667403] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved 
[    1.667405] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved 
[    1.667406] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved 
[    1.667408] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved 
[    1.667410] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved 
[    1.667412] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved 
[    1.667414] system 00:0c: [mem 0xdfa00000-0xdfa00fff] has been reserved 
[    1.667416] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) 
[    1.667522] pnp 00:0d: [mem 0x20000000-0x201fffff] 
[    1.667523] pnp 00:0d: [mem 0x40004000-0x40004fff] 
[    1.667560] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved 
[    1.667562] system 00:0d: [mem 0x40004000-0x40004fff] has been reserved 
[    1.667564] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) 
[    1.681713] pnp: PnP ACPI: found 14 devices 
[    1.681714] ACPI: ACPI bus type pnp unregistered 
[    1.687660] PCI: max bus depth: 1 pci_try_num: 2 
[    1.687685] pci 0000:00:1c.0: PCI bridge to [bus 01-01] 
[    1.687696] pci 0000:00:1c.2: PCI bridge to [bus 02-02] 
[    1.687700] pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff] 
[    1.687708] pci 0000:00:1c.3: PCI bridge to [bus 03-03] 
[    1.687711] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff] 
[    1.687715] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff] 
[    1.687719] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref] 
[    1.687734] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 
[    1.687740] pci 0000:00:1c.0: setting latency timer to 64 
[    1.687748] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 
[    1.687753] pci 0000:00:1c.2: setting latency timer to 64 
[    1.687761] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 
[    1.687766] pci 0000:00:1c.3: setting latency timer to 64 
[    1.687769] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7] 
[    1.687771] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff] 
[    1.687773] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] 
[    1.687774] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] 
[    1.687776] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] 
[    1.687777] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff] 
[    1.687779] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff] 
[    1.687780] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff] 
[    1.687782] pci_bus 0000:00: resource 12 [mem 0xdfa00000-0xfeafffff] 
[    1.687784] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff] 
[    1.687786] pci_bus 0000:03: resource 0 [io  0xe000-0xefff] 
[    1.687787] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] 
[    1.687789] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] 
[    1.687813] NET: Registered protocol family 2 
[    1.689271] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) 
[    1.689935] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) 
[    1.691451] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) 
[    1.691641] TCP: Hash tables configured (established 524288 bind 65536) 
[    1.691644] TCP reno registered 
[    1.691655] UDP hash table entries: 4096 (order: 5, 131072 bytes) 
[    1.691686] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) 
[    1.691764] NET: Registered protocol family 1 
[    1.691774] pci 0000:00:02.0: Boot video device 
[    1.691783] pci 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 
[    1.691836] pci 0000:00:14.0: PCI INT A disabled 
[    1.691845] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 
[    1.691875] pci 0000:00:1a.0: PCI INT A disabled 
[    1.691892] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 
[    1.691913] pci 0000:00:1d.0: PCI INT A disabled 
[    1.691929] PCI: CLS 64 bytes, default 64 
[    1.691930] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) 
[    1.691932] Placing 64MB software IO TLB between ffff8800d5aca000 - ffff8800d9aca000 
[    1.691934] software IO TLB at phys 0xd5aca000 - 0xd9aca000 
[    1.692294] audit: initializing netlink socket (disabled) 
[    1.692302] type=2000 audit(1421669705.524:1): initialized 
[    1.712282] HugeTLB registered 2 MB page size, pre-allocated 0 pages 
[    1.713820] VFS: Disk quotas dquot_6.5.2 
[    1.713855] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 
[    1.714191] fuse init (API version 7.17) 
[    1.714255] msgmni has been set to 15754 
[    1.714523] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) 
[    1.714543] io scheduler noop registered 
[    1.714545] io scheduler deadline registered 
[    1.714566] io scheduler cfq registered (default) 
[    1.714759] pci_hotplug: PCI terrifying Plug PCI Core version: 0.5 
[    1.714771] pciehp: PCI Express terrifying Plug Controller Driver version: 0.4 
[    1.714808] intel_idle: MWAIT substates: 0x21120 
[    1.714809] intel_idle: v0.4 model 0x3A 
[    1.714810] intel_idle: lapic_timer_reliable_states 0xffffffff 
[    1.714858] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared 
[    1.714887] ACPI: AC Adapter [AC] (off-line) 
[    1.714953] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 
[    1.714958] ACPI: Power Button [PWRB] 
[    1.714983] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 
[    1.714986] ACPI: Sleep Button [SLPB] 
[    1.715013] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 
[    1.729605] ACPI: Lid Switch [LID0] 
[    1.729648] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 
[    1.729650] ACPI: Power Button [PWRF] 
[    1.809477] thermal LNXTHERM:00: registered as thermal_zone0 
[    1.809479] ACPI: Thermal Zone [TZ0] (36 C) 
[    1.809497] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared 
[    1.809503] ACPI: Battery Slot [BAT0] (battery present) 
[    1.809528] ERST: Table is not found! 
[    1.809529] GHES: HEST is not enabled! 
[    1.809583] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled 
[    2.220821] Linux agpgart interface v0.103 
[    2.220890] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset 
[    2.220965] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable 
[    2.221836] agpgart-intel 0000:00:00.0: detected 65536K stolen memory 
[    2.221925] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 
[    2.222789] brd: module loaded 
[    2.223228] loop: module loaded 
[    2.223316] ahci 0000:00:1f.2: version 3.0 
[    2.223326] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 
[    2.223363] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X 
[    2.223383] ahci: SSS flag set, parallel bus scan disabled 
[    2.236653] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x15 impl SATA mode 
[    2.236669] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst 
[    2.236674] ahci 0000:00:1f.2: setting latency timer to 64 
[    2.252940] scsi0 : ahci 
[    2.252997] scsi1 : ahci 
[    2.253042] scsi2 : ahci 
[    2.253087] scsi3 : ahci 
[    2.253133] scsi4 : ahci 
[    2.253176] scsi5 : ahci 
[    2.253370] ata1: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16100 irq 40 
[    2.253371] ata2: DUMMY 
[    2.253373] ata3: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16200 irq 40 
[    2.253374] ata4: DUMMY 
[    2.253376] ata5: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16300 irq 40 
[    2.253377] ata6: DUMMY 
[    2.253608] Fixed MDIO Bus: probed 
[    2.253623] tun: Universal TUN/TAP device driver, 1.6 
[    2.253624] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 
[    2.253656] PPP generic driver version 2.4.2 
[    2.253719] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 
[    2.253730] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 
[    2.253744] ehci_hcd 0000:00:1a.0: setting latency timer to 64 
[    2.253747] ehci_hcd 0000:00:1a.0: EHCI Host Controller 
[    2.253775] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 
[    2.253795] ehci_hcd 0000:00:1a.0: debug port 2 
[    2.257676] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported 
[    2.257687] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7e18000 
[    2.272571] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 
[    2.272674] hub 1-0:1.0: USB hub found 
[    2.272677] hub 1-0:1.0: 2 ports detected 
[    2.272720] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 
[    2.272734] ehci_hcd 0000:00:1d.0: setting latency timer to 64 
[    2.272737] ehci_hcd 0000:00:1d.0: EHCI Host Controller 
[    2.272766] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 
[    2.272785] ehci_hcd 0000:00:1d.0: debug port 2 
[    2.276652] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported 
[    2.276663] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7e17000 
[    2.292524] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 
[    2.292621] hub 2-0:1.0: USB hub found 
[    2.292623] hub 2-0:1.0: 2 ports detected 
[    2.292661] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 
[    2.292668] uhci_hcd: USB Universal Host Controller Interface driver 
[    2.292688] xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 
[    2.292708] xhci_hcd 0000:00:14.0: setting latency timer to 64 
[    2.292711] xhci_hcd 0000:00:14.0: xHCI Host Controller 
[    2.292740] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 
[    2.292814] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported 
[    2.292852] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X 
[    2.292937] xHCI xhci_add_endpoint called for root hub 
[    2.292939] xHCI xhci_check_bandwidth called for root hub 
[    2.292955] hub 3-0:1.0: USB hub found 
[    2.292961] hub 3-0:1.0: 4 ports detected 
[    2.293000] xhci_hcd 0000:00:14.0: xHCI Host Controller 
[    2.293025] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 
[    2.293080] xHCI xhci_add_endpoint called for root hub 
[    2.293081] xHCI xhci_check_bandwidth called for root hub 
[    2.293097] hub 4-0:1.0: USB hub found 
[    2.293102] hub 4-0:1.0: 4 ports detected 
[    2.336498] usbcore: registered new interface driver libusual 
[    2.336528] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12 
[    2.343006] i8042: Detected active multiplexing controller, rev 1.1 
[    2.345760] serio: i8042 KBD port at 0x60,0x64 irq 1 
[    2.345765] serio: i8042 AUX0 port at 0x60,0x64 irq 12 
[    2.345785] serio: i8042 AUX1 port at 0x60,0x64 irq 12 
[    2.345800] serio: i8042 AUX2 port at 0x60,0x64 irq 12 
[    2.345815] serio: i8042 AUX3 port at 0x60,0x64 irq 12 
[    2.345898] mousedev: PS/2 mouse device common for all mice 
[    2.346112] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 
[    2.346137] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs 
[    2.346191] device-mapper: uevent: version 1.0.3 
[    2.346233] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com 
[    2.346314] cpuidle: using governor ladder 
[    2.346441] cpuidle: using governor menu 
[    2.346442] EFI Variables Facility v0.08 2004-May-17 
[    2.346579] TCP cubic registered 
[    2.346646] NET: Registered protocol family 10 
[    2.346922] NET: Registered protocol family 17 
[    2.346925] Registering the dns_resolver key type 
[    2.347013] PM: Hibernation image not present or could not be loaded. 
[    2.347020] registered taskstats version 1 
[    2.349208] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 
[    2.352876]   Magic number: 15:387:279 
[    2.352896] event_source tracepoint: hash matches 
[    2.352902] tty tty16: hash matches 
[    2.352958] rtc_cmos 00:06: setting system clock to 2015-01-19 12:15:06 UTC (1421669706) 
[    2.572071] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) 
[    2.572592] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded 
[    2.572596] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out 
[    2.572599] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out 
[    2.572920] ata1.00: supports DRM functions and may not be fully accessible 
[    2.572951] ata1.00: ATA-9: Crucial_CT240M500SSD1, MU03, max UDMA/133 
[    2.572953] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA 
[    2.573493] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded 
[    2.573497] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out 
[    2.573500] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out 
[    2.573803] ata1.00: supports DRM functions and may not be fully accessible 
[    2.573835] ata1.00: configured for UDMA/133 
[    2.574033] scsi 0:0:0:0: Direct-Access     ATA      Crucial_CT240M50 MU03 PQ: 0 ANSI: 5 
[    2.574229] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) 
[    2.574233] sd 0:0:0:0: Attached scsi generic sg0 type 0 
[    2.574237] sd 0:0:0:0: [sda] 4096-byte physical blocks 
[    2.574444] sd 0:0:0:0: [sda] Write Protect is off 
[    2.574460] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 
[    2.574592] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
[    2.575511]  sda: sda1 sda2 
[    2.575912] sd 0:0:0:0: [sda] Attached SCSI disk 
[    2.583994] usb 1-1: new high-speed USB device number 2 using ehci_hcd 
[    2.616054] ACPI: Battery Slot [BAT0] (battery present) 
[    2.616587] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found 
[    2.616589] EDD information not available. 
[    2.687835] Refined TSC clocksource calibration: 2594.107 MHz. 
[    2.687844] Switching to clocksource tsc 
[    2.716434] hub 1-1:1.0: USB hub found 
[    2.716539] hub 1-1:1.0: 6 ports detected 
[    2.827591] usb 2-1: new high-speed USB device number 2 using ehci_hcd 
[    2.891464] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) 
[    2.893959] ata3.00: ATAPI: Slimtype DVD A  DS8A4S, JA22, max UDMA/100 
[    2.895691] ata3.00: configured for UDMA/100 
[    2.899432] scsi 2:0:0:0: CD-ROM            Slimtype DVD A  DS8A4S    JA22 PQ: 0 ANSI: 5 
[    2.905080] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray 
[    2.905096] cdrom: Uniform CD-ROM driver Revision: 3.20 
[    2.905283] sr 2:0:0:0: Attached scsi CD-ROM sr0 
[    2.905397] sr 2:0:0:0: Attached scsi generic sg1 type 5 
[    2.960015] hub 2-1:1.0: USB hub found 
[    2.960216] hub 2-1:1.0: 6 ports detected 
[    3.127033] usb 3-2: new full-speed USB device number 2 using xhci_hcd 
[    3.222778] ata5: SATA link down (SStatus 0 SControl 300) 
[    3.223843] Freeing unused kernel memory: 928k freed 
[    3.223920] Write protecting the kernel read-only data: 12288k 
[    3.226814] Freeing unused kernel memory: 1576k freed 
[    3.229071] Freeing unused kernel memory: 1184k freed 
[    3.240154] udevd[107]: starting version 175 
[    3.265261] Btrfs loaded 
[    3.268287] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded 
[    3.268304] r8169 0000:03:00.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 
[    3.268333] r8169 0000:03:00.2: (unregistered net_device): unknown MAC, using family default 
[    3.268347] r8169 0000:03:00.2: setting latency timer to 64 
[    3.268429] r8169 0000:03:00.2: irq 42 for MSI/MSI-X 
[    3.268707] r8169 0000:03:00.2: eth0: RTL8168b/8111b at 0xffffc90005786000, 00:90:f5:e4:fc:5f, XID 08800800 IRQ 42 
[    3.268709] r8169 0000:03:00.2: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] 
[    3.275518] xor: automatically using best checksumming function: generic_sse 
[    3.285226] usbcore: registered new interface driver usbhid 
[    3.285229] usbhid: USB HID core driver 
[    3.294633]    generic_sse: 13096.000 MB/sec 
[    3.294636] xor: using function: generic_sse (13096.000 MB/sec) 
[    3.295497] device-mapper: dm-raid45: initialized v0.2594b 
[    3.315851] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2 
[    3.318808] input: Logitech Unifying Device. Wireless PID:4013 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/input/input5 
[    3.319097] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4013] on usb-0000:00:14.0-2:1 
[    3.350907] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) 
[    3.724072] Adding 7999484k swap on /dev/sda1.  Priority:-1 extents:1 across:7999484k SS 
[    3.731494] ADDRCONF(NETDEV_UP): eth0: link is not ready 
[    3.740605] udevd[412]: starting version 175 
[    3.766421] lp: driver loaded but no devices found 
[    3.798819] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro 
[    3.844201] device-mapper: multipath: version 1.3.2 loaded 
[    3.865335] ppdev: user-space parallel port driver 
[    3.867527] Bluetooth: Core ver 2.16 
[    3.867546] NET: Registered protocol family 31 
[    3.867548] Bluetooth: HCI device and connection manager initialized 
[    3.867550] Bluetooth: HCI socket layer initialized 
[    3.867552] Bluetooth: L2CAP socket layer initialized 
[    3.867557] Bluetooth: SCO socket layer initialized 
[    3.879614] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 
[    3.879617] Bluetooth: BNEP filters: protocol multicast 
[    3.884421] type=1400 audit(1421669708.028:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=701 comm="apparmor_parser" 
[    3.884927] type=1400 audit(1421669708.028:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=701 comm="apparmor_parser" 
[    3.887812] Bluetooth: RFCOMM TTY layer initialized 
[    3.887818] Bluetooth: RFCOMM socket layer initialized 
[    3.887819] Bluetooth: RFCOMM ver 1.11 
[    4.083374] mei: module is from the staging directory, the quality is unknown, you have been warned. 
[    4.083701] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 
[    4.083710] mei 0000:00:16.0: setting latency timer to 64 
[    4.083763] mei 0000:00:16.0: irq 43 for MSI/MSI-X 
[    4.096625] type=1400 audit(1421669708.240:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=753 comm="apparmor_parser" 
[    4.096975] type=1400 audit(1421669708.240:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=753 comm="apparmor_parser" 
[    4.097287] type=1400 audit(1421669708.244:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=753 comm="apparmor_parser" 
[    4.097570] wmi: Mapper loaded 
[    4.122048] cfg80211: Calling CRDA to update world regulatory domain 
[    4.132525] [drm] Initialized drm 1.1.0 20060810 
[    4.188357] cfg80211: World regulatory domain updated: 
[    4.188360] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 
[    4.188363] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[    4.188365] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) 
[    4.188367] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) 
[    4.188369] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[    4.188371] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) 
[    4.189493] init: failsafe main process (842) killed by TERM signal 
[    4.201454] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: 
[    4.201457] Copyright(c) 2003-2011 Intel Corporation 
[    4.201496] iwlwifi 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 
[    4.201510] iwlwifi 0000:02:00.0: setting latency timer to 64 
[    4.201532] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000 
[    4.201535] iwlwifi 0000:02:00.0: pci_resource_base = ffffc900057b4000 
[    4.201537] iwlwifi 0000:02:00.0: HW Revision ID = 0xC4 
[    4.201657] iwlwifi 0000:02:00.0: irq 44 for MSI/MSI-X 
[    4.201758] iwlwifi 0000:02:00.0: Detected 135 Series 1x1 BGN/BT, REV=0x120 
[    4.201957] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S 
[    4.205196] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 
[    4.205201] i915 0000:00:02.0: setting latency timer to 64 
[    4.218480] iwlwifi 0000:02:00.0: device EEPROM VER=0x81c, CALIB=0x6 
[    4.218484] iwlwifi 0000:02:00.0: Device SKU: 0X150 
[    4.218486] iwlwifi 0000:02:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X1 
[    4.218874] iwlwifi 0000:02:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels 
[    4.229513] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 
[    4.229762] Registered led device: phy0-led 
[    4.229789] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain 
[    4.239544] type=1400 audit(1421669708.384:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=972 comm="apparmor_parser" 
[    4.239941] type=1400 audit(1421669708.384:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=972 comm="apparmor_parser" 
[    4.243991] type=1400 audit(1421669708.388:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=974 comm="apparmor_parser" 
[    4.244522] type=1400 audit(1421669708.388:10): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=974 comm="apparmor_parser" 
[    4.251622] i915 0000:00:02.0: irq 45 for MSI/MSI-X 
[    4.251630] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). 
[    4.251632] [drm] Driver supports precise vblank timestamp query. 
[    4.251979] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem 
[    4.255772] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' 
[    4.261180] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S 
[    4.268708] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x0 
[    4.339913] init: alsa-restore main process (1033) terminated with status 19 
[    4.354782] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S 
[    4.362293] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x0 
[    4.447891] ADDRCONF(NETDEV_UP): wlan0: link is not ready 
[    4.448110] ADDRCONF(NETDEV_UP): wlan0: link is not ready 
[    4.454905] init: anacron main process (1063) killed by TERM signal 
[    4.457106] r8169 0000:03:00.2: eth0: link down 
[    4.457545] ADDRCONF(NETDEV_UP): eth0: link is not ready 
[    4.457759] ADDRCONF(NETDEV_UP): eth0: link is not ready 
[    4.982559] fbcon: inteldrmfb (fb0) is primary device 
[    4.982652] Console: switching to colour frame buffer device 170x48 
[    4.982674] fb0: inteldrmfb frame buffer device 
[    4.982675] drm: registered panic notifier 
[    5.327309] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 
[    5.342915] acpi device:3f: registered as cooling_device4 
[    5.343093] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 
[    5.343235] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no) 
[    5.343323] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 
[    5.343517] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 
[    5.343573] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X 
[    5.343597] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 
[    5.379397] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7 
[    5.889636] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0 
[    5.889688] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 
[    5.889800] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 
[    5.889903] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 
[    6.065328] [drm:gen6_sanitize_pm] *ERROR* Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 16000000, was 12060000 
[    6.673650] wlan0: authenticate with 00:26:42:b5:cf:90 (try 1) 
[    6.675556] wlan0: authenticated 
[    6.689273] wlan0: associate with 00:26:42:b5:cf:90 (try 1) 
[    6.692700] wlan0: RX AssocResp from 00:26:42:b5:cf:90 (capab=0x411 status=0 aid=6) 
[    6.692703] wlan0: associated 
[    6.696780] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready 
[   11.366957] iwlwifi 0000:02:00.0: Tx aggregation enabled on ra = 00:26:42:b5:cf:90 tid = 0

Avec mes meilleures salutations.
Jbgruring

Edit sebseb01 : Je me suis permis de faire un peut de mise en page

Dernière modification par sebseb01 (19 Jan 2015 14:29:49)

François Marthaler · 19 Jan 2015 16:09:21

Bonjour,

Le problème s'est posé chez 2-3 utilisateurs why!, si j'en crois cette file de discussion...

Puisse cela vous aider ou vous donner des pistes!...

Cordialement.

sebseb01 · 19 Jan 2015 16:27:04

Après avoir chercher sur le site de Clevo. Il semble que se lecteur de carte soit connecter en PCI. Ca sera donc la commande suivante :

Code:

lspci -v

(retourne la liste des périphériques et le "-v" c'est pour avoir des informations plus complètes)

jbgruring · 20 Jan 2015 11:54:09

Voilà le résutltats de lspci -v

Code:

jean-bernard@jeanbernard-W240EU:~$ lspci -v
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
    Subsystem: CLEVO/KAPOK Computer Device 0240
    Flags: bus master, fast devsel, latency 0
    Capabilities: <access denied>
    Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
    Subsystem: CLEVO/KAPOK Computer Device 0240
    Flags: bus master, fast devsel, latency 0, IRQ 45
    Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
    Memory at e0000000 (64-bit, prefetchable) [size=256M]
    I/O ports at f000 [size=64]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: <access denied>
    Kernel driver in use: i915
    Kernel modules: i915

00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
    Subsystem: CLEVO/KAPOK Computer Device 0240
    Flags: bus master, medium devsel, latency 0, IRQ 41
    Memory at f7e00000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: xhci_hcd

00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
    Subsystem: CLEVO/KAPOK Computer Device 0240
    Flags: bus master, fast devsel, latency 0, IRQ 43
    Memory at f7e1a000 (64-bit, non-prefetchable) [size=16]
    Capabilities: <access denied>
    Kernel driver in use: mei
    Kernel modules: mei

00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
    Subsystem: CLEVO/KAPOK Computer Device 0240
    Flags: bus master, medium devsel, latency 0, IRQ 16
    Memory at f7e18000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ehci_hcd

00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
    Subsystem: CLEVO/KAPOK Computer Device 0240
    Flags: bus master, fast devsel, latency 0, IRQ 46
    Memory at f7e10000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp

00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    Memory behind bridge: f7d00000-f7dfffff
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp

00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    I/O behind bridge: 0000e000-0000efff
    Memory behind bridge: f7c00000-f7cfffff
    Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
    Subsystem: CLEVO/KAPOK Computer Device 0240
    Flags: bus master, medium devsel, latency 0, IRQ 23
    Memory at f7e17000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ehci_hcd

00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
    Subsystem: CLEVO/KAPOK Computer Device 0240
    Flags: bus master, medium devsel, latency 0
    Capabilities: <access denied>
    Kernel modules: iTCO_wdt

00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
    Subsystem: CLEVO/KAPOK Computer Device 0240
    Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 40
    I/O ports at f0b0 [size=8]
    I/O ports at f0a0 [size=4]
    I/O ports at f090 [size=8]
    I/O ports at f080 [size=4]
    I/O ports at f060 [size=32]
    Memory at f7e16000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: <access denied>
    Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
    Subsystem: CLEVO/KAPOK Computer Device 0240
    Flags: medium devsel, IRQ 3
    Memory at f7e15000 (64-bit, non-prefetchable) [size=256]
    I/O ports at f040 [size=32]
    Kernel modules: i2c-i801

02:00.0 Network controller: Intel Corporation Centrino Wireless-N 135 (rev c4)
    Subsystem: Intel Corporation Centrino Wireless-N 135 BGN
    Flags: bus master, fast devsel, latency 0, IRQ 44
    Memory at f7d00000 (64-bit, non-prefetchable) [size=8K]
    Capabilities: <access denied>
    Kernel driver in use: iwlwifi
    Kernel modules: iwlwifi

03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01)
    Subsystem: CLEVO/KAPOK Computer Device 0240
    Flags: bus master, fast devsel, latency 0, IRQ 11
    Memory at f7c00000 (32-bit, non-prefetchable) [size=64K]
    Capabilities: <access denied>

03:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0a)
    Subsystem: CLEVO/KAPOK Computer Device 0240
    Flags: bus master, fast devsel, latency 0, IRQ 42
    I/O ports at e000 [size=256]
    Memory at f0004000 (64-bit, prefetchable) [size=4K]
    Memory at f0000000 (64-bit, prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: r8169
    Kernel modules: r8169

Merci pour le travail.
Avec mes meilleures salutations.
Jbgruring

sebseb01 · 20 Jan 2015 12:24:19

Voila ton lecteur de carte ... visiblement non supporté

Code:

03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01)
    Subsystem: CLEVO/KAPOK Computer Device 0240
    Flags: bus master, fast devsel, latency 0, IRQ 11
    Memory at f7c00000 (32-bit, non-prefetchable) [size=64K]
    Capabilities: <access denied>

Ce qui ma mener à ce bug dans le launchpad https://bugs.launchpad.net/ubuntu/+sour … ug/1165324
Dont la solution semble être la mise à jour (avec un noyau ">3.8", donc après mi-2013). La version stable d'ubuntu (14.04) résoudrait donc se problème

jbgruring · 20 Jan 2015 15:39:00

Bonjour à tous,
J'ai passé ma machine en Ubuntu 14.04 LTS et la carte est parfaitement lisible. Merci à tous pour ce dépannage.
Avec mes meilleures salutations.
Jbgrurinb

Problème résolu

François Marthaler · 24 Jan 2015 23:54:51

Ouf!

Je marque donc le problème comme [Résolu].

Cordialement.

Swisslinux.org

− Le carrefour GNU/Linux en Suisse −

Recherche

Menu

Forum

Identification

Inscription

Langue

Le Forum

#1 19 Jan 2015 10:08:04

[Résolu] Lire une carte SD

#2 19 Jan 2015 10:19:16

Re: [Résolu] Lire une carte SD

#3 19 Jan 2015 10:29:07

Re: [Résolu] Lire une carte SD

Code:

Code:

#4 19 Jan 2015 13:25:43

Re: [Résolu] Lire une carte SD

Code:

Code:

#5 19 Jan 2015 16:09:21

Re: [Résolu] Lire une carte SD

#6 19 Jan 2015 16:27:04

Re: [Résolu] Lire une carte SD

Code:

#7 20 Jan 2015 11:54:09

Re: [Résolu] Lire une carte SD

Code:

#8 20 Jan 2015 12:24:19

Re: [Résolu] Lire une carte SD

Code:

#9 20 Jan 2015 15:39:00

Re: [Résolu] Lire une carte SD

#10 24 Jan 2015 23:54:51

Re: [Résolu] Lire une carte SD

Pied de page des forums